View GL34J_1182221.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

GL34A THRU GL34J
SURFACE MOUNT GLASS PASSIVATED FAST SWITCHING JUNCTION RECTIFIER
Reverse Voltage - 50 to 600 Volts
* D
DO-213AA
Forward Current - 0.5 Ampere
FEATURES
Plastic package has Underwriters Laboratory Flammability Classification 94V-0 For surface mount applications High temperature metallurgically bonded construction Glass passivated cavity-free junction Capable of meeting environmental standards of MIL-S-19500 Fast switching for high efficiency High temperature soldering guaranteed: 450C/5 seconds at terminals. Complete device submersible temperature of 260C for 10 seconds in solder bath
N
T
E
SOLDERABLE ENDS 1st BAND 2nd BAND
P A T
E
D2
D1= 0.066 0.060 (1.676) (1.524)
0.022 (0.559) 0.016 (0.406) 0.145 (3.683) 0.131(3.327) 1st band denotes type and polarity 2cnd band denotes voltage type D2 = D1 + 0 - 0.008 (0.20)
MECHANICAL DATA
Case: JEDEC DO-213AA molded plastic over glass body Terminals: Plated terminals, solderable per MIL-STD-750, Method 2026 Polarity: Two bands indicate cathode-end - 1st band denotes device type and 2nd band denotes repetitive peak reverse voltage rating Mounting Position: Any Weight: 0.0014 ounce, 0.036 gram
Dimensions in inches and (millimeters) *Glass-plastic encapsulation technique is covered by Patent No. 3,996,602 and brazed-end cap assembly by Patent No. 3,930,306
(R)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25C ambient temperature unless otherwise specified.
Standard recovery device: first band is white
SYMBOLS
GL34A
GL34B
GL34D
GL34G
GL34J
Polarity color bands (2nd Band) Maximum repetitive peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Maximum average forward rectified current at TT=75C Peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) Maximum instantaneous forward voltage at 0.5A Maximum DC reverse current at rated DC blocking voltage TA=25C TA=125C
VRRM VRMS VDC I(AV)
Gray 50 35 50
Red 100 70 100
Orange 200 140 200 0.5
Yellow 400 280 400
Green 600 420 600
Volts Volts Volts Amp
IFSM VF IR IR(AV) trr CJ RJA RJT TJ, TSTG
10.0 1.2 5.0 50.0 30.0 1.5 4.0 150.0 70.0 -65 to +175 1.3
Amps Volts A A s pF C/W C
Maximum full load reverse current, full cycle average at TA=55C Typical reverse recovery time (NOTE 1) Typical junction capacitance (NOTE 2) Maximum thermal resistance (NOTE 3) (NOTE 4) Operating junction and storage temperature range
NOTES: (1) Reverse recovery test conditions IF=0.5A, IR=1.0A, Irr=0.25A (2) Measured at 1.0 MHz and applied reverse voltage of 4.0 Volts (3) Thermal resistance from junction to ambient, 0.2 x 0.2" (5.0 x 5.0mm) copper pads to each terminal (4) Thermal resistance from junction to terminal, 0.2 x 0.2" (5.0 x 5.0mm) copper pads to each terminal
4/98
RATINGS AND CHARACTERISTIC CURVES GL34A THRU GL34J
FIG. 2 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT PEAK FORWARD SURGE CURRENT, AMPERES
FIG. 1 - FORWARD CURRENT DERATING CURVE AVERAGE FORWARD RECTIFIED CURRENT, AMPERES
0.5 0.4 0.3 0.2 0.1 0 25
10 8.0 6.0 4.0 2.0 0
60 HZ RESISTIVE OR INDUCTIVE LOAD
TJ=TJ max. 8.3ms SINGLE HALF SINE-WAVE (JEDEC Method)
1
10
NUMBER OF CYCLES AT 60 HZ
100
50
75
100
125
150
175
TERMINAL TEMPERATURE, C
FIG. 3 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS INSTANTANEOUS REVERSE CURRENT, MICROAMPERES
FIG. 4 - TYPICAL REVERSE CHARACTERISTICS
10
INSTANTANEOUS FORWARD CURRENT, AMPERES
10
1
TJ=100C
1
TJ=25C PULSE WIDTH=300s 1% DUTY CYCLE
0.1
0.1
TJ=25C
0.01
0
20
40
60
80
100
PERCENT OF RATED PEAK REVERSE VOLTAGE, %
0.01 0.4
0.6
0.8
1.0
1.2
1.4
1.6
INSTANTANEOUS FORWARD VOLTAGE, VOLTS
FIG. 5 - TYPICAL JUNCTION CAPACITANCE
30
JUNCTION CAPACITANCE, pF
TJ=25C f=1.0 MHZ Vsig=50mVp-p
10
1
1
10
REVERSE VOLTAGE, VOLTS
100

▲Up To Search▲

Price & Availability of GL34J

	To Download GL34J Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .